RADIOFREQUENCY TECHNOLOGIES

DERMOMAX RF

Two RF Technologies. One Professional Platform.

A professional 2 MHz RF system combining vacuum-assisted microneedling, non-needle fractional RF, monopolar RF and cooling.

Product Introduction

A professional 2 MHz RF platform combining vacuum-assisted microneedling, non-needle fractional RF and integrated cooling. DERMOMAX RF gives trained operators structured control over treatment mode, tip selection, microneedle depth, RF delivery and vacuum support within one organised system.

VACUUM MICRONEEDLING AND FRACTIONAL RF PLATFORM

Structured RF control across face and body workflows

DERMOMAX RF combines two complementary RF technologies. Vacuum Micro Needle RF supports controlled needle placement with adjustable depth and vacuum pressure, while Fractional RF provides a non-needle contact option with dedicated tip formats for different treatment areas.

The platform adds selectable bipolar and monopolar operation, adjustable RF intensity and pulse duration, a separate cooling head and a digital interface for operator and client records. Trained professionals can configure each workflow according to the approved protocol, treatment area, skin assessment and intended endpoint.

Concluding Statement

One professional platform for practices that require flexible RF applicators, controlled parameter selection and an organised treatment workflow.

Key Value Pillars

Two RF technologies within one system

Vacuum Micro Needle RF and Fractional RF allow the operator to select either a needling or non-needle contact approach according to the approved professional protocol.
Supporting evidence: Two working modes are documented in the user manual and training material.
Professional relevance: Keeps complementary RF workflows within one system and one interface.

Controlled depth with vacuum support

The microneedle handpiece combines adjustable depth from 0.4 to 4.0 mm with four vacuum pressure levels.
Professional relevance: Supports consistent contact and deliberate depth selection according to the treatment area and professional assessment.

Applicator choice for different treatment areas

Four microneedle tip sizes and three fractional RF formats support considered selection for smaller facial zones, the face and larger body areas.
Professional relevance: Makes applicator selection visible within the treatment setup instead of relying on one universal tip.

Integrated cooling and digital organisation

A separate cooling head supports post-treatment cooling, while the Android interface organises modes, parameters, client records and saved settings.
Professional relevance: Brings treatment control and workflow information into one professional operating environment.

RADIOFREQUENCY TECHNOLOGIES

Technologies

01

Vacuum Micro Needle RF

Operating principle: The handpiece uses controlled microneedle insertion to deliver RF energy at a selected depth. Vacuum support helps stabilise skin contact during needle placement.

Confirmed controls: Depth from 0.4 to 4.0 mm, pressure levels 1 to 4, intensity levels 1 to 10 and adjustable pulse duration.

Professional value: Supports controlled, area-specific microneedle RF workflows using insulated or non-insulated disposable tips.

Qualification: Parameter selection, tip choice and treatment suitability must follow professional assessment, approved instructions and local requirements.

02

Fractional RF

Operating principle: The Fractional RF handpiece delivers RF energy through a non-needle contact tip selected for the intended treatment area.

Confirmed controls: Intensity levels 1 to 10, active pulse from 10 to 900 ms, interval time from 0.5 to 3 seconds, and single or multi output modes.

Professional value: Provides a separate RF workflow for professionally assessed face and body protocols without microneedle insertion.

03

Bipolar and Monopolar Options

Bipolar configuration: RF energy operates between electrodes within the selected microneedle tip.

Monopolar configuration: The client holds the negative pole bar while the microneedle tip acts as the active electrode.

Professional value: Allows the operator to select the documented polarity configuration required by the approved face or body protocol.

04

Integrated Cooling Head

Function: A separate cooling head provides four settings from off to level 3, with a documented minimum temperature of minus 10 degrees Celsius.

Professional value: Supports controlled cooling within the professional post-treatment workflow.

Qualification: Use, contact method and duration must follow the approved instructions and training.

Technologies

Professional Applications

DERMOMAX RF is intended for professionally assessed RF workflows performed by medical professionals or appropriately trained operators. Mode, applicator, polarity, depth and energy settings must follow the approved instructions, the treatment area and the individual skin assessment.
01

Facial texture and visible pore workflows

Supports professional treatment planning focused on uneven-looking texture and the appearance of enlarged pores.

02

Fine line and wrinkle appearance workflows

Supports professionally assessed protocols focused on the visible appearance of fine lines, wrinkles and skin laxity.

03

Acne scar and pitted scar appearance workflows

Vacuum microneedle RF supports professional protocols focused on the appearance of selected acne and pitted scars.

04

Body skin and stretch mark workflows

Applicator formats, adjustable depth and polarity options support professionally assessed body protocols focused on skin laxity, selected scars and stretch mark appearance.

Professional Use Limitation

Treatment suitability, recovery and response vary by individual. DERMOMAX RF does not guarantee clearance, tightening, resurfacing, scar removal, absence of discomfort or a specific number of sessions.

Components

Applications and Components

Component Function and confirmed controls Configuration and area
Vacuum Micro Needle RF handpiece Combines microneedle insertion, RF delivery and adjustable vacuum support. M-18, M-25, M-49 and M-81 insulated or non-insulated disposable tips.
Fractional RF handpiece Provides non-needle fractional RF delivery with adjustable intensity, pulse and interval. F-3 x 3 for small facial zones, F-5 x 5 for face, and F-9 x 9 for face or body.
Cooling head Provides cooling levels 0 to 3 for the professional post-treatment workflow. Separate reusable handpiece. Follow approved cleaning and contact instructions.
Negative pole bar Completes the electrical pathway during documented monopolar operation. Used only when the selected professional protocol requires monopolar mode.
10.4 inch colour touchscreen Controls mode, applicator, parameters, account access and treatment records. Android interface with five groups of savable parameter settings.
Foot switch Activates RF output according to the selected working mode. Supports hands-on operation while maintaining control of the applicator.

 

ORGANISED DIGITAL CONTROL

One interface for mode selection, parameter control and treatment records

The 10.4 inch colour touchscreen gives trained operators direct access to the two RF technologies and their relevant controls. The displayed options change with the selected handpiece and workflow.

  • RF intensity from level 1 to 10 with energy-dependent pulse limits.
  • Active pulse from 10 to 900 ms and fractional interval time from 0.5 to 3 seconds.
  • Microneedle depth from 0.4 to 4.0 mm and vacuum pressure from level 1 to 4.
  • Bipolar or monopolar selection, tip size, cooling level and working mode.
  • Operator accounts, client records, treatment history and five saved parameter groups.
Clinics remain responsible for lawful collection, access, retention and protection of personal data under applicable privacy requirements.

A structured sequence from assessment to treatment record

DERMOMAX RF supports a repeatable professional workflow without replacing clinical judgement, approved instructions or operator training.

  • Review the client record, treatment area, contraindications and intended professional protocol.
  • Select Vacuum Micro Needle RF or Fractional RF and fit the appropriate tip or applicator.
  • Set polarity, depth, vacuum, intensity, pulse, interval and cooling controls as applicable.
  • Perform the protocol with foot-switch or documented automatic operation while monitoring skin response.
  • Complete approved post-treatment cooling, aftercare guidance and treatment documentation.
DESIGN FOR PROFESSIONAL RF WORKFLOWS

Mobile architecture with organised handpiece access

DERMOMAX RF combines a floor-standing mobile platform, adjustable touchscreen and top-mounted handpiece holders. The operator can keep the microneedle handpiece, Fractional RF handpiece, cooling head and negative pole bar organised around the treatment station.

  • 4 inch touchscreen positioned for direct parameter review.
  • Dedicated holders for the principal handpieces and accessories.
  • Foot-switch activation for hands-on treatment control.
  • Mobile base for considered positioning within the treatment room.
  • Integrated water-based cooling system using purified or distilled water.
Professional Experience

Focused control throughout the RF treatment workflow

DERMOMAX RF keeps mode selection, applicator choice and relevant parameters visible within one interface. The operator can review the client record, retrieve saved settings and document the treatment without moving between separate control systems.

Training and Integration

Professional preparation for responsible system use

OMAX can support DERMOMAX RF integration through installation guidance, product introduction and operator familiarisation. Training should cover assessment, contraindications, mode and tip selection, polarity, parameter principles, disposable tip handling, cleaning, maintenance, cooling and post-treatment responsibilities.

Support Availability

DERMOMAX RF is intended for medical professionals or appropriately trained operators. Local qualification, registration and scope-of-practice requirements apply.

Availability Disclaimer

Training format, language, duration and certification arrangements may vary by market and authorised distribution partner

Technical Support

Professional support for installation and ongoing operation.

OMAX provides access to installation guidance, technical support, maintenance information and consumable-tip planning through the applicable commercial terms. Support may include system setup, functional checks, handpiece inspection, water-system care and review of approved operating documentation.

  • Installation and initial system checks.
  • Operator onboarding and technical familiarisation.
  • Troubleshooting and maintenance guidance.
  • Consumable RF tip and accessory planning.
  • Service support according to the applicable agreement.

Support Availability

DERMOMAX RF is intended for medical professionals or appropriately trained operators. Local qualification, registration and scope-of-practice requirements apply.

System

Parameter Published specification
Product OMAX DERMOMAX RF
System type Professional Vacuum Microneedle and Fractional RF System
RF frequency 2 MHz
Maximum RF output power 50 W
Machine power 500 W
Working technologies Vacuum Micro Needle RF and Fractional RF
Touchscreen 10.4 inch colour touchscreen with Android system

 

Treatment control

Parameter Published specification
Intensity Levels 1 to 10
Active pulse 10 to 900 ms with energy-dependent maximum values
Microneedle depth 0.4 to 4.0 mm adjustable in 0.2 mm steps
Vacuum pressure Levels 1 to 4 with vacuum on or off
Polarity selection Bipolar and monopolar options within microneedle operation
Fractional interval time 0.5 to 3.0 seconds
Cooling head Levels 0 to 3 with documented minimum temperature of minus 10 degrees Celsius
Saved settings Five parameter groups

 

Applicator system

Parameter Published specification
Microneedle tips Insulated and non-insulated M-18, M-25, M-49 and M-81
Fractional RF tips F-3 x 3, F-5 x 5 and F-9 x 9
Additional components Cooling head, negative pole bar and foot switch

 

Electrical and operating environment

Parameter Published specification
European mains configuration AC 220 V plus or minus 10 percent, 50 Hz
Recommended room temperature Approximately 25 degrees Celsius
Relative humidity 80 percent or below
Atmospheric pressure 860 to 1060 hPa
Cooling water 3 litres of purified or distilled water
Exact commercial dimensions, weight, supplied tip quantities and package specifications require confirmation in the final signed OMAX specification sheet. Final specifications and supplied components remain subject to the confirmed commercial configuration.

Documentation & Downloads

Documentation & Downloads

Document Availability
Product brochure To be developed from the approved website content.
Technical specification sheet Pending final OMAX confirmation of the commercial configuration.
User manual Available to qualified professional users and authorised partners.
Training material Provided within applicable onboarding and training arrangements.
Cleaning and maintenance guidance Available within approved technical documentation.
Compliance documents Available to qualified professional purchasers on request after exact model and market verification.

 

Evidence and Compliance

Professional operation within an approved framework

DERMOMAX RF is intended for use by medical professionals or appropriately trained operators within professional medical-aesthetic or aesthetic environments. Operators must follow the approved instructions, applicable European Union and local requirements, professional suitability assessment and appropriate infection-control procedures.

Microneedle cartridges are documented as sterile disposable tips. Fractional RF tips and the cooling head require handling, disinfection and reuse controls according to the approved instructions. Treatment settings, contraindications, adverse-event management and aftercare remain part of professional training and controlled documentation.

Related Systems

CEMAX

CEMAX

A professional electromagnetic platform combining an integrated treatment chair with two external body applicators for structured pelvic floor and body-conditioning workflows.

CARBOMAX

CARBOMAX

A professional Q-switched Nd:YAG laser platform combining 1064 nm and 532 nm wavelengths with nanosecond pulse delivery and interchangeable focus heads.

SHAPEMAX

SHAPEMAX

A professional body-contouring platform combining vacuum, mechanical roller action, radiofrequency, 940 nm near-infrared light and 40 kHz cavitation.

Professional relevance

Related through body-area workflows and portfolio expansion into a different technology category.

Evaluate DERMOMAX RF for your practice

Support your professional RF portfolio with vacuum microneedling, Fractional RF, selectable polarity, dedicated tip formats and integrated cooling within one organised platform. Contact OMAX to discuss the confirmed configuration, training options and technical support available for your market.
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.